VT506
Perfectly intelligible and neutral voice reproduction is the top priority with the VT506 and is made possible by the high-end capsule used. The microphone is also ideally suited for wearing under clothing and has therefore been established in the film production sector for many years. The VT506 capsule has a slight frequency boost at 10KHz.
Thanks to injection molding, the microphone is extremely robust and shock-resistant. The cable is molded directly into the capsule housing, which makes it virtually impossible to pull out.
The RF-protected microphone capsule prevents interference from RF signals and the particularly flexible connection cable ensures that handling noise is eliminated.
- Professional lavalier microphone for various productions in the broadcast/film sector etc.
- Omnidirectional characteristic (picks up equally from all sides, neutral voice reproduction without proximity effect)
- RF protected microphone capsule
- VT506-style sound with slight frequency boost at 10KHz
- Flexible and low handling noise 1.5m cable
Specifications
| Capsule type | Electret condenser |
|---|---|
| Polar pattern | Omni |
| Frequency range | 40Hz- 20kHz |
| Sensitivity | -45 dB re 1V/Pa @ 1 kHz (5.6234mv/Pa) |
| Noise level | 26dB "A" weighted |
| Max. input SPL | 118dB |
| Impedance | 1 kOhm |
| Bias/+VDC | 1.3V (0.9-20V) |
| Current drain | 25 μA |
| Dimensions | 13x7x3.5mm |
| Cable | Length 1.5m Ø 1.5mm |
| Weight | 7g |
| Red Wire | +VDC |
| Copper Wire | NF |
| Green Wire | Ground |