Only One Tenth Of An Inch (2.5mm) In Diameter, The B6 Out Performs Microphones Many Times It’s Size. The B6 Features Replaceable Protective Caps That Can Change It’s Color And Frequency Response To Match Your Application. Designed To Survive, It’s Highly Resistant To Moisture, Makeup And Other Hazards Found In A Production Environment.
Easily Hidden
Smaller Than The Cable Of Other Lavaliers, The B6 Is Effectively Hidden When It’s In Plain Sight. For Example Choose A Protective Cap Near The Color Of A Shirt Andpoke The B6 Out Through A Button Hole. Tape The Cable To The Back Of The Shirt To Secure It And Your Done. Say Goodby To The Hassle And Degraded Sound Quality You Get Burying Mikes Under Clothing!
Makeup And Sweat Resistant
Built To Withstand Perspiration And Makeup. The B6 Will Even Survive An Overnight Soak In Your Favorite Cola Beverage! The Outer Screen In The B6’s Replaceable Cap Stops Makeup And Sweat Before It Enters The Mike Element. If It Clogs You Can Simply Remove The Cap For Cleaning Or Replacement.
Specifications (wired for use with a wireless transmitter):
Compatibility:
Designed To Operate With Any Wireless Transmitter That Can Supply Microphone Power.
Directional Pattern:
OmniDirectional
Frequency Response:
30hz To 20khz +- 3db (Flat Cap)
Sensitivity (10k Ohm Load):
6mv/Pa For P/N B6w4ff05XXX
2mv/Pa For P/N B6w5ff05XXX
Equivalent Acoustic Noise:
24db Spl A-Wt. (6mv/Pa Mike)
29db Spl A-Wt. (2mv/Pa Mike)
Maximum Sound Pressure:
118 Db (6mv/Pa Mike)
128 Db (2mv/Pa Mike
Power Requirements:
1.5 To 3.5 Volts Under Load@ 325ua
Output Impedance:
2k Ohms
Output Connector:
To Match Transmitter Or Pigtails
Head Dimensions:
.1" X .15" (2.5mm X 3.8mm)
Weight:
.002 Oz (.06 G)
Cable Length:
Approximately 60" (5 ft.)
Supplied Accessories:
Carrying Case, Tie Clip, Wind Screen And Set Of 3 Protective Caps.