SA&J DB25M-43XM/33XF-4W/P1/TRG-XX 4-Wire Intercom & Tally Breakout Cable For Select Sony, Panasonic & Ikegami CCU's

Our Item# DB25M-43XM/33XF-XX
SA & J Electronics Inc.
Mfr# DB25M-43XM/33XF-4W/P1/TRG-XX
4-Wire Intercom & Tally Breakout Cable For Select Sony (CCU550 HDCU3300 HXCU100 HSCU300 & Similar), Panasonic & Ikegami CCUs, DB25 Male To 7 XLR's: Eng I/O, Prod I/O, Pgm 1 In, Tally Red & Green, 3 ft.
Available to Order Ships in ~7-10 business days

Product Notes

4-Wire Intercom/Tally Breakout Cable For Sony, Panasonic, Ikegami and Blackmagic URSA Broadcast CCU's.  

DB25 Male To (4) 3pin XLR Males and (3) 3pin XLR Females.

This cable brings out the following connections to 3pin XLRs from it's DB25 Male connector:
  • Engineering In  (3pin XLR Female) [ENG-In]
  • Engineering Out (3pin XLR Male) [ENG-Out]
  • Production In (3pin XLR Female) [PROD-In]
  • Production Out (3pin XLR Male) [PROD-Out]
  • Program 1 In (3pin XLR Female) [PGM1-In]
  • Tally Red In (3pin XLR Male) [TALLY RED]
  • Tally Green In (3pin XLR Male) [TALLY GREEN]
Works with Blackmagic Design CCU's:
  • Blackmagic URSA Broadcast Studio Fiber Converter CCU #CINEURSANWFRSTUD (This model only supports 4-Wire Intercom)

Note: PGM-2 is not brought out in this cable. If you are interested in a cable that brings out PGM-2 and your CCU is capable of doing so, see this item:

Intercom and Tally Breakout Adapter Cable
Standard length 3 ft. (custom lengths available).  These cables are made in-house and are made upon order.
Works with Sony CCU's:
  • CCU-550 (CCU550)
  • CCU-TX50 (CCUTX50)
  • HDCU-1000 (HDCU1000)
  • HDCU-1500 (HDCU1500)
  • HDCU-3300 (HDCU3300)
  • HXCU-100 (HXCU100)
  • HXCU-D70 (HXCUD70)
  • HXCU-FB70 (HXCUFB70)
  • HXCU-FB80 (HXCUFB80)
  •       HXCU-FZ90 (HXCUFZ90)
  • HSCU-300 (HSCU300)
  • And Similar Models
Works with Panasonic CCU's:
  • AKHCU200P, AK-HCU200P (PS)
  • AKHCU250P, AK-HCU250P (PJ, PS, PSJ)
  • AKUCU500P, AK-UCU500P (PS)
  • AKUCU600P, AK-UCU600P (PJ, PS, PSJ)
  • And Similar Models
Works With Ikegami CCU's:
  • BST-55 (BST55)
  • And Similar Models


This cable is not compatible with the following old CCU models: CCU350, CCU355, CCUTX7

Tally XLR wiring: Tally XLR's are wired Pin2: Tally-X, Pin3: Tally-Y. The normal procedure to turn on a Tally light would be to short XLR pins 2 & 3 which completes (closes) the circuit and therefore turns on the Tally (some CCU's may differ, refer to your CCU's service manual for complete information).

Please note that not all CCU's, intercom systems & tally systems are capable of utilizing all connection types, so please refer to your system's specifications for more information on capabilities, configuration and use.